Petzl RocPec Drill Holder P26
Petzl RocPec Drill Holder P26
A nicely designed piece of diabolical engineering. By far the best lightweight hand drill made, fits SDS-style drill bits - hit it with a hammer. The installation and removal of the bit is easy and requires no tools. (bits not included)
All bolting gear sold by CUSA comes with a couple of diatribes about why you should not bolt. The Rock Pecker does not include a drill bit, which is required for proper usage. Using this product successfully requires expert knowledge, experience and practice.
Weight: 198 g
You may also consider…
No longer available. Try HowNOT2.com
Stainless Steel: expensive, strong, but hey, how many of these are you using each year, anyway! Much more resistant to corrosion than galvanized (except in a salt-water setting). If you want your bolts to be semi-permanent, go stainless.
But in EVERY CASE, you otta watch this video first, which you probably have to copy/paste:
https://www.youtube.com/watch?v=74-0NOFNkpo
Select 10mm for 3/8" bolts, or 12mm for 1/2" bolts. Nicely finished.
1.7 ounces (48 grams) each.
No Longer available. Try HowNOT2.com
All you need for the Devil's work (except a wrench), bolts and hangers. Our kit no longer includes bolts and hangers due to changes in availability. (NOT as shown)
Seriously? Uh, very few people need this, and even then… please watch this video first, which you will need to copy/paste to get:
https://www.youtube.com/watch?v=74-0NOFNkpo
No Longer available. Try HowNOT2.com
All you need for the Devil's work (except a wrench)!
Revised AGAIN - no bolts or hangers, just the kit. You will need 3/8" bolts and hangers to complete the tool.
Seriously, you really should run through this video first, but you will need to copy/paste to get it as I don’t know how to imbed it here: https://www.youtube.com/watch?v=74-0NOFNkpo
