1" Tubular Webbing, Black
1" Tubular Webbing, Black
Sold by the foot - lengths up to 40' will be shipped as one piece. Longer pieces normally will, but not guaranteed (unless you ask). Or buy a 300' spool!
I only sell black these days, as black is ALWAYS a natural color, and may soon be required by some land managers in the future. It is the least obtrusive single color. Black - the NEW Orange!
We also might have some pieces already cut… easier for us if you order one of these, so they are offered at a slight discount.
Strong 1" tubular webbing for a myriad of uses - the mainstay for rigging anchors in canyons, especially in trade-route canyons, or for high-wear things like deadmen and cairn anchors. We usually carry about 40 feet, just in case, though using it can mostly be avoided by using the SandTrap and FiddleStick.
A standard tie on a two-bolt anchor usually takes 8-10 feet.
Members of the Coalition of American Canyoneers receive a 20% discount. So join, please.
Strength: 4200 lbs
Weight: .43 ounces per foot (12.3 grams per foot)
Made in USA
You may also consider…
NEW!! We are converting our program to stainless, with the help of HowNOT2, starting with 6mm and 7mm. These are sourced from Climbing Taiwan who does a great QA job - and yet the price is about half of what we previously had to charge. And then tariffs, means the price is about the same.
The new 6mm LONG rapides are especially nice because they open wide, so they can fit over honking glue in bolts, etc. We have added 7mm LONG rapides also. Yes, the long ones are heavier than the normal ones…
8mm: Genuine Maillons Rapides from France - with quality control and excellent workmanship! The standard for leaving as 'rings' on rappel anchors. Steel holds up to wet sandy ropes a whole lot better than aluminium. Discounted when buying 10 at a time. aka Rapid Link Rapide Quick Link Ring Q/RL RL
Prices up a LOT with “the modern world”. Moving steel from France or Taiwan to the USA has become expensive. Though I still take a short margin since RLs are left in place as a donation to the community. (If you want links to not be harvested put a drop of superglue on the threads as you install them.)
NOTE: counts on availability are screwy because we are selling 10-packs and singles from the same stock. So if what you want does not show as available, drop us an email and we can adjust how we present it on the website - assuming we have some in stock.
Soft, grippy nylon accessory cord for prusiks. Sold by the foot - order how many feet you want, I will provide one continuous piece. (I know it sounds silly to say that, but some people ask.) Up to the length of the spool. Color: pretty, but probably not as shown.
Strength: 750 daN
No longer available. Try HowNOT2.com
Stainless Steel: expensive, strong, but hey, how many of these are you using each year, anyway! Much more resistant to corrosion than galvanized (except in a salt-water setting). If you want your bolts to be semi-permanent, go stainless.
But in EVERY CASE, you otta watch this video first, which you probably have to copy/paste:
https://www.youtube.com/watch?v=74-0NOFNkpo
No Longer available. Try HowNOT2.com
All you need for the Devil's work (except a wrench), bolts and hangers. Our kit no longer includes bolts and hangers due to changes in availability. (NOT as shown)
Seriously? Uh, very few people need this, and even then… please watch this video first, which you will need to copy/paste to get:
https://www.youtube.com/watch?v=74-0NOFNkpo